Why Do Logger Boots Have High Heels - Complete Information (2023)

Why Do Logger Boots Have High Heels - Complete Information (1)

If you are looking for work boots, you might notice that they are a little elevated and have heels in them. Logger boots are no different however, logger heels are usually taller than regular work boots.

Logger boots have heels to provide better traction and grip for people who are on their feet all day working in rugged environments. Logger boots also provide a better grip for people who climb ladders and utility poles.

In this article, we will talk about why logger boots have high heels. If you are unsure of whether you should buy logger boots, we will also talk about the pros and cons of wearing logger boots so make sure to stay tuned until the end!

What is a Logger Boot?

A logger boot is not a typical boot used for casual wear. Logger boots are made to withstand harsh outdoor conditions and rugged environments. These boots are made with premium leather and offer many benefits to the weather such as being waterproof and having insulation.

Logger boots typically have a shaft that goes past above the ankles and usually has a shaft height of about 8 to 9 inches. Some logger boots can also have a mid-calf shaft height. This gives the ankle much-needed support, especially on uneven terrains.

One of the common features of a logger boot is its high heels. A logger boot typically has a heel measuring about 1.5 to 2 inches high. The raised heels in logger boots are not just for stylistic features but they definitely serve their purpose to those who wear logger boots.

Why Do Logger Boots Have High Heels?

Why Do Logger Boots Have High Heels - Complete Information (3)

There are several reasons as to why logger boots have high heels and these heels are not there just for the looks. Logger boots are typically used by people in the logging industry or those who work in rugged environments. Let’s take a look at some of the reasons why logger boots have high heels.

Logger Boots Keep Your Feet From Touching The Ground

As we talked about earlier, logger boots are usually worn by people who work in rugged environments. People who work outside usually encounter debris, rocks, or uneven surfaces which can make it more difficult for them to be more stable on their feet.

Logger boots help in protecting your feet from hazardous debris that can cause injuries. These boots will also keep your feet dry and clean when it is raining as the outsoles of the boots are not touching the floor directly. The raised heel of a logger boot makes sure that your feet do not touch the floor at any time.

Logger Heels Provide Better Traction On Uneven Terrains

The high heels of logger boots are designed to have better traction which is needed when working outside, especially on inclined or uneven terrains. Logger heels often have deep lugged patterns which can make walking on uneven surfaces easier.

The heels also help provide a better grip on the ground to provide a more stable footing to the wearer. Aside from providing great traction on inclined terrains, logger boots will also help grip the rungs of a ladder better than boots with no heels. Logger boots usually have a large shank which can help with climbing ladders and offer more stability on uneven surfaces.

Logger Heels Can Provide Comfort

You probably think that heeled shoes are not the most comfortable thing to wear. While you are probably right, logger boots can provide comfort to people who wear them.

Since the heel acts as a barrier between the floor and your feet, walking can be more comfortable. The heels will protect your feet from rocks, logs, and other debris that you might step on.

Logger boots can also keep your heels from being in pain as the heels are the first part of the feet that touches the ground when walking. Wearing heeled boots can take some time to get used to if you and your feet are not used to wearing heeled boots. Loggers do wear logged boots as it is not as painful when they step on fallen branches or rocks when logging.

Logger Heels Provide Better Protection And Durability

For loggers who work with fell timbers, having heeled boots can make it easier for them to push or roll logs away. The heels will serve as protection between the log and your feet to prevent pain and injuries to your feet.

The heels will also protect the outsole of the boots making it last longer. When you are regularly rolling logs away using your boots, the heels will be the ones to wear out first instead of the boots’ outsoles.

Benefits Of Wearing Logger Boots

Why Do Logger Boots Have High Heels - Complete Information (4)

If you are a logger or are someone who works in rugged environments, wearing logger boots can definitely benefit your feet. Logger boots can be very supportive to your feet and keep them protected throughout your work day.

Logger boots are durable and can withstand wear and tear and are specifically designed to be used as a work boot. Some logger boots have spiked soles to reduce work-related injuries such as tripping and slipping. A logger boot also helps you have more grip on the ground because of its high heels.

A logger boot’s heel is raised to keep moisture out as the raised heels elevate the feet and prevent them from being in contact with the ground. As we talked about earlier, logger boots also have great traction, especially on uneven or inclined surfaces. This makes it easier to walk on an incline or even climb ladders and utility poles.

Most logger boots also have safety features such as soft toe, steel toe, or composite toe. These are great features, especially if your workplace requires safety toe work boots.

Disadvantages Of Wearing Logger Boots

Why Do Logger Boots Have High Heels - Complete Information (5)

While there are many benefits to wearing logger boots, there are also some disadvantages to it. Like any other footwear, wearing logger boots in the wrong size will cause many problems to your feet. A logger boot that is too small will cause your feet to cramp while a size too big will be unsupportive and unstable.

Logger boots are also heavy as it is meant to provide protection to your feet when worn in a rugged workplace. Logger boots are heavy-duty boots that can feel too heavy to some. This can cause you discomfort when you are not used to wearing heavy boots.

Another feature that may pose a disadvantage to some is the boots’ high heels. Logger heels are not there purely for decorative and stylish reasons. They can provide great traction and stability for people who work outside, especially in rugged environments.

However, if it is your first time wearing heeled boots, it may be an uncomfortable feeling. High heels can also put pressure on your feet and lower back, especially if the heels are too high.

Logger boots are also not as versatile as some work boots as they are specifically designed for outdoor use. These kinds of boots might be too uncomfortable to use for daily casual wear or even for indoor jobs.

Frequently Asked Questions

Who Needs Logger Boots With High Heels?

People who need logger boots are typically linemen, farmers, ranchers, vehicle operators, and loggers. Linemen need heeled boots to be able to have a strong grip when climbing utility poles. Farmers, ranchers, and loggers work outdoors while vehicle operators need to be able to get in and out of their vehicles with ease.

Which Are The Best Logger Boots With High Heels?

Some of the best logger boots are the Georgia, Chippewa, Danner, and Thorogood logger boots


Logger boots have high heels and it is not for stylistic purposes. The high heels in logger boots are there to provide better traction and grip to people who work in harsh outdoor conditions.

If you are wondering why logger boots have high heels, we have talked about it in detail in this article so you don’t have to search around to find the answer. If you have any more questions, let us know via the contact form on our website.


Why Do Logger Boots Have High Heels - Complete Information? ›

Worse, after it rains, these places become considerably more challenging to walk on. This is why logger work boots have raised heels; they ensure enough space between the ground and a portion of the outsole, ensuring that your feet do not become wet or dirty.

Why do logger boots have such a tall heel? ›

The raised heel is beneficial for climbing, allowing someone to easily grip into the rungs of a ladder or gaffs for climbing a telephone pole. The raised heel on the logger boot also helps by elevating the foot and keeping any moisture out. The larger shank in a logger boot also helps with climbing and stability.

Why do logger boots have tapered heels? ›

Working outside on rough terrain can be tough on your feet, which is why logger boots have heels that provide additional support, especially on uneven ground. The heel helps maintain grip, improves your posture, and stops your boot from sinking into the mud.

Why do wildland boots have heels? ›

Why is that? Mostly for additional ankle support, especially when negotiating uneven or mixed terrain, and definitely when going uphill. The raised heel also gives additional arch support, which is needed when doing heavy outdoor work as the arch functions more or less as the shock absorber of the foot.

Why do logging boots have spikes? ›

The great terrain equalizer, or Caulk Logger boot, is known for its fierce spikes (caulks) that provide traction in the most treacherous conditions. The tall logger heel provides balance and support while the 8-9oz leather holds your foot and ankle in place.

What is the benefit of taller boots? ›

The number one reason people opt for a taller upper is to protect your ankles and shins from a variety of potential issues. Anything over an 8” top will give you more protection if you wear your boots in a forest environment.

How tall is the heel on logger boots? ›

Traditionally, the logger heel (also known as a woodsman heel) will sit at a height of roughly 1.5 to 2 inches. Shorter logger heels, often known as low woodsman heels, are usually less than 1.5 inches tall.

Why do boots have heel drop? ›

Heel Drop and Its Function

This automatically pushes the foot toward the front for a quicker push-off in the gait cycle. Thus, the higher heel drop places more pressure toward the front part of the foot, but it promotes faster pace in running.

Why do military boots have a heel? ›

Often in combat, soldiers will break an ankle. This is pretty common with paratroopers and other assault troops. If you have a boot with a high top, the soldier can lace up the boot and continue with his mission even though he might be in serious pain.

What is the difference between a spring heel and a block heel? ›

The traditional logger heel, often called a block or a woodman's heel, is a high, heavy heel built wider than the heel on a cowboy boot. An alternative to the block heel is the “spring heel,” the bottom of which is a one-piece, taping sole.

Do high heel boots hurt? ›

Strains, tears and fractures. The angle a high-heeled shoe puts your foot could cause short-term and even chronic pain in the ball of your foot and toes.

Are logger boots good for your knees? ›

Working on uneven, steep terrain that is often slick with snow, ice, or mud; having to repeatedly climb in and out of equipment with a high step up or down; and carrying heavy or awkward loads, all combine to put loggers at exceptionally high risk for knee injuries and pain.

Why do cowboy boots have underslung heels? ›

The reason for this is practical: the nook of that slant is what's going to help keep the boot in a stirrup. This type of heel is known as an underslung heel. And because there's no relatively sharp, 90-degree angle at the back of the heel, it's gentler on the horse since there's less friction and thus discomfort.

What are loggers boots called? ›

Caulk boots or calk boots (also called cork boots, timber boots, logger boots, logging boots, or corks) are a form of rugged footwear that are most often associated with the timber industry but are also worn regularly for hiking and in industries such as manufacturing and construction, owing to their safety features.

Why do logger boots hurt my feet? ›

A lot of boot makers use cheap insoles, or don't add material in the footbed to properly support the arch. Lacking arch support can lead to foot problems like plantar fasciitis and other niggling injuries in the ankle and lower leg. Inadequate support can also worsen any damage in the knees, hips and lower back.

What is different about logger boots? ›

Decades ago, "logging boots" specifically meant leather work boots with caulked soles for logging. Today, it could mean that (loggers still wear them) but also means a type of work boot with a tall non-Western heel and usually a lug-type sole. Sometimes, though not always, a kiltie is added to the tongue.

How long can you wear tall boots? ›

Depending on the material, style and color, tall boots will generally work for three-season wear. In the winter, tall boots keep you stylish and warm. Wear them over skinny pants, under boot cut trousers or over tights with a skirt. In winter, even fashionable ladies turn to tall winter fur-lined or knit boots.

Why are cowboy boots so tall? ›

The cowboy boot's most distinctive design features were centered around utilitarian purposes: the tall shaft protected the legs from brush, water, and other hazards while riding the horse, while the angled heel kept the boot secure in the stirrups without endangering the rider by letting the foot get trapped in case of ...

What is a Cuban heel? ›

A Cuban heel is a fashionable shoe bottom that becomes more narrow at the bottom portion of the heel. Another signature characteristic of the Cuban heel is its straight, flat edge along the front-facing portion of the heel.

What is the tallest high heel ever? ›

In New York, USA, largest high heeled shoe was created by Jill Martin and fashion brand Kenneth Cole. The shoe measures an astounding 1.95 m (6 ft 5 in) long and 1.85 m (6 ft 1 in) tall. 103 people like this.

What is the best heel height? ›

The best height heel height is between one and two inches. If the shoe is extremely tall, it will cause jamming of the toes and ball of the foot every time you walk. Pay attention to the shape of the toe box, whether it's pointy or curved.

Is a higher heel drop better? ›

A high heel-toe drop (over 7 mm) is best for runners who land heel first, have issues with their Achilles tendon, or who often wear shoes with an elevated heel. A low heel-toe drop (from 0 to 6 mm) is best for runners who land on the middle or front of the foot.

What heel drop is best for walking? ›

Runners need shoes with a higher difference in height from the heel through the toe called the heel drop, while walkers should choose shoes with a heel drop of less than 8 millimeters.

What heel drop is best for knees? ›

Heel-Toe Drop

A lower heel drop is better for most types of knee pain, including IT band syndrome and runner's knee. However, if your knees hurt because of how your stride is compensating for plantar fasciitis pain, a higher heel-toe drop may be beneficial for you.

Why do soldiers tuck their pants in their boots? ›

And while blousing your boots may serve the purpose of keeping your slacks from flapping in the wind, loose fabric from catching while jumping out of an aircraft, or just keeping dirt from finding its way between your toes, the act of securing the bottoms of your trousers can be hard work.

Why do soldiers throw their boots? ›

The tradition can also cover Soldiers moving to a new post. The theory is that the boots are no longer needed and, therefore, are tossed to announce that a Soldier's “time is short.”

What do Marines call boots? ›

The term's origin apparently comes from Vietnam, as an acronym meaning “beginning of one's tour.” New Marines joining a unit are usually referred to as “boots” until they go on a deployment or have at least a year or two in the Corps.

What are heels without back called? ›

Mule is a style of shoe that has no back or constraint around the foot's heel. Mules have a history going as far back as Ancient Rome, even though they were not popularly worn until sixteenth-century Europe. There, mules were bedroom slippers and not worn in public.

What is a thick heel called? ›

Block Heel

Also known as chunky-heel shoes, this design features a thick, square heel that resembles a block. The heel's larger surface area makes this style easier to walk in by distributing your body weight more evenly rather than loading it all onto a small point (like that of a stiletto heel).

What are really high heels called? ›

A stiletto heel, or just stiletto, is a shoe with a long, thin, high heel.

Why are high heels a turn on? ›

High heels adjust lumbar curvature, or the posture of your spine, increase pelvic tilt, and enhance the appearance of the chest and hips, all of which contribute to men perceiving a woman's gait in heels as more erotic and beautiful.

What is the secret to wearing high heels? ›

Trick 1: Walk Heel to Toe—not toe to heel

The easiest way to look like an amateur in heels is to put your whole foot down at once as if you're wearing flats. When wearing heels, put your heel down first, followed by your toe. This will make your walk look more natural.

Can you wear logger boots everyday? ›

So long as they are properly constructed and taken care of, not at all. However, would a pair of 10-inch logger boots be comfortable to wear in an office everyday? Once broken in, they'd be plenty comfortable but your feet would ROAST under a desk, and that wouldn't be pleasant.

Why do doctors wear cowboy boots? ›

According to a news release from JPS, surgeons like Rhodes know it matters what you wear on your feet. Cowboy boots “give you a built-in heel lift,” which reduces stress on the Achilles tendon.

Do logger boots have steel shanks? ›


Available in steel toe and composite toe, both give you the benefit of a steel shank for improved comfort and support, and storm welt construction for enhanced strength and added protection from moisture. We also make logger work boots with 3M™ Thinsulate™ insulation for warmth without added bulk.

What is the lowest heel on a cowboy boot? ›

Lower heels (around one inch) are usually found in ropers and are easiest to walk or work in; higher heels (around two inches) are best for riding… or looking taller! A middle heel height is the most versatile Western boot heel for a combination of riding, walking and working that many cowboys favor.

Should your heel come up when walking in cowboy boots? ›

The Heel of the Boot:

Your heels should slip up to 1/4-1/2 inch. Don't worry, as you wear your new boots, the flexing action of walking will break in the boots and the action of walking softens the sole which will cause most of the heel slippage to disappear after a few wearing's.

What is a dogger heel? ›

Dogger. Also referred to as a Cuban heel, a slight angle inward. on the outer portion of the heel.

Who invented logger boots? ›

Nothing embodies the innovation of Otto White more than the original Logger Arch. It made the boot feel better than any other boot.

What does a 90 degree heel mean? ›

In contrast to a wedge sole, a 90-degree heel sole has more grooves and lugs for digging into the earth or bracing against rocks and other protrusions from the ground. That makes these boots ideal for outdoor work, especially in wilderness areas.

What are the logging boots with spikes called? ›

There are three commonly accepted spellings for this storied pair of shoes: cork, caulk and calk. Although all of these spellings are used, the most common that I've seen is caulk, as in this photo and caption from foresthistory.org.

Are boots with heels bad for your back? ›

Some Shoes Are More Likely Than Others to Cause Problems

When you put on a pair of high heels, your posture changes completely. Due to the unnatural position of your feet, your lower back moves forward slightly, disrupting the natural curve of your spine.

Why do boots feel weird to walk in? ›

Your feet need time to both adapt to the arch of the boots as well as rest from it and your boots need time to dry from the sweat accumulated from you wearing them. By taking breaks in between, both your feet and the leather on your boots have time to breathe.

Are heeled boots bad for your back? ›

“… the low back should have a slight inward curve to it. High-heeled shoes greatly exaggerate this curve and can compress the facet joints of the spine.” “High heels may cause the back to arch excessively.” “Wearing excessively high heels causes …

What is the heel lock lacing method for logger boots? ›

The heel-lock method involves only the top two eyelets. You know how to lace work boots, so lace them up from the bottom like you usually do until you get to the top. Once you get there, each lace needs to go up vertically into the last eyelet. The last two eyelets should not have a criss-cross pattern on the outside.

What is the importance of logging boots? ›

It is very important to make sure your feet are protected and stable during the long hours you spend on your feet performing logging work. Our high-quality men's logger work boots will provide you with the traction, support, and safety you need for your feet.

Does OSHA require logging boots? ›

The employer shall assure that each employee wears foot protection, such as heavy-duty logging boots that are waterproof or water repellant, cover and provide support to the ankle.

Why are horse riding boots so tall? ›

The classic boot comes high enough up the leg to prevent the leathers of the saddle from pinching the leg of the rider, has a sturdy toe to protect the rider's foot when on the ground and has a distinct heel to prevent the foot from sliding through the stirrup.

Why are some cowboy boots so tall? ›

The cowboy boot's most distinctive design features were centered around utilitarian purposes: the tall shaft protected the legs from brush, water, and other hazards while riding the horse, while the angled heel kept the boot secure in the stirrups without endangering the rider by letting the foot get trapped in case of ...

Why do horse riders keep their heels down? ›

Here are three reasons to keep your heels down: Stability and safety. To lengthen your leg deep and around your horse for jumping or quick movements. A secure, anchored position if your horse spooks.

Should horse riding boots have a heel? ›

Safety: Riding shoes must be closed-toed and have a distinct heel. The last thing you want is a huge hoof crushing your little piggies. Heels keep your feet from accidentally sliding through the stirrups and getting caught.

Does anyone wear tall boots anymore? ›

The reason that tall boots simply won't go out of style is because there are so many different iterations. Within the tall boot family comes riding boots, over-the-knee boots, cowboy boots, slouchy boots, heeled boots and the list goes on!

What are monkey boots? ›

Compared to the most common style of boots, monkey boots have an elongated vamp and a minimized toe box. They're stubbier and offer more protection along the sides of your feet.

What do loggers wear? ›

Most loggers wear durable jeans or work pants as well as a durable shirt. Many companies make clothing specifically for logging and other outdoor professions.

What are hobnailed boots? ›

: a heavy boot with short nails driven into the bottom to protect against wear.

Why don t cowboy boots have laces? ›

Western boots have no laces because, in the event that the Cowboy fell off his horse, it would be too complicated if the laces get caught in the stirrup and drag the Cowboy. This particular design aspect of the boot was created for safety reasons.

Why do cowboy boots have nails? ›

In footwear, a hobnail is a short nail with a thick head used to increase the durability of boot soles.

Do real cowboys wear square toe boots? ›

Do real cowboys wear square toe boots? While many cowboys have become fans of the square toe boots for their advantages, the more traditional cowboys steer clear of them since they do not provide the same accessibility as the pointed toe boots allow them.


Top Articles
Latest Posts
Article information

Author: Virgilio Hermann JD

Last Updated: 07/12/2023

Views: 6342

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Virgilio Hermann JD

Birthday: 1997-12-21

Address: 6946 Schoen Cove, Sipesshire, MO 55944

Phone: +3763365785260

Job: Accounting Engineer

Hobby: Web surfing, Rafting, Dowsing, Stand-up comedy, Ghost hunting, Swimming, Amateur radio

Introduction: My name is Virgilio Hermann JD, I am a fine, gifted, beautiful, encouraging, kind, talented, zealous person who loves writing and wants to share my knowledge and understanding with you.